6
1.
Identify the Front Stabilizer (10), which is nar-
rower than the Rear Stabilizer (not shown).
While another person lifts the front of the Frame
(1), attach the Front Stabilizer to the Frame with
two M10 x 70mm Carriage Bolts (34) and two
M10 Locknuts (33).
10
33
34
1
1
33
2. While another person lifts the back of the Frame
(1), attach the Rear Stabilizer (28) to the Frame
with two M10 x 70mm Carriage Bolts (34) and
two M10 Locknuts (33).
34
28
1
2
33
33
3. The Console (23) can use four “AA” batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery cover, insert
the batteries into the battery compartment, and
reattach the battery cover.
Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
23
Batteries
Battery
Cover
3
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
Summary of Contents for Momentum 2000
Page 17: ...17 NOTES...