Please Note: The assembly is divided into four stages: 1) frame assembly, 2) press and butterfly arm
assembly, 3) cable and pulley assembly, and 4) seat and backrest assembly. The hardware for each
stage is packaged separately. Wait until you begin each assembly stage to open that parts bag.
1" Round Inner Cap (49)
1" Round Cover Cap (70)
3/4" Round Inner Cap (34)
1/2" x 3/4" Spacer (61)
1" Inner Cap (81)
1 3/4" Square Inner Cap (44)
2" Square Inner Cap (27)
2" Square Outer Cap (51)
1" x 7/8" Plastic Bushing (75)
WLEMSY82000 R1000A
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have
been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it
has been pre-assembled. The number in parenthesis following each part description refers to the key number
of the part.
