7
STEP 4
Install the saddle (7) to the Horizontal seal post (31) with
Multifunctional wrench.
Then tighten the Horizontal seal post (31) on the Saddle
supporting tube (6) with Flat washer(19),Knob nut (20).
Finally, insert the Saddle supporting tube (6) to the Main
frame (1) and tightly with Knob bolt (28) .You can control
the Knob bolt (28) to adjust the appropriate height which is
suitable for you .
Note:Before use the bike, please make sure that the Sad-
dle(7) have locking on the Horizontal seal post (31).
STEP 5
Attach the Pedals (10L/R) to the Cranks (35L/R) of the Main
Frame (1).
Note: The left pedal (10L) should be tighten in the counter-
clockwise direction, the right pedal (10R) should be tighten
in the clockwise direction.
STEP 6
Connect the Extended wire (21) and Pulse sensor wire(27)
with the wire on the Computer (9). Finally fix the Computer
(9) onto the top of the Front vertical tube (4) with Screws
(34), Flat washers (34).
Now, your machine is ready for use.
