6
STEP 1
Install the Front stabilizer (2) and Rear stabilizer
(3) to the Main frame (1) and fixing with the Square
neck bolt (13), Arc washers (14) and Acorn nut
(15).
STEP 2
Connect the Sensor connective wire (21) with the
Sensor wire (16), and then fix the Front vertical
tube (4) to the Main frame (1) with the Bolts (18)
and Arc washers (14).
STEP 3
Put the Pulse wire (27) through the top hole of the
Front vertical tube (4), then adjust the Handle bar
(5) to a appropriate location ,then tighten the Han-
dlebar to the Front vertical tube (4) with T-shaped
bolt(30), Handle cover(24), Fix pipe (23) and Flat
washer(22).
