8
4. With the help of a second person, raise the
Uprights (96, 98) so the Base (101) is flat on the
floor as shown. Next, position the front of the
Frame (67) between the Uprights.
See the inset drawing.
Locate the wire tie in-
side the lower end of the Right Upright (98).
Wrap the wire tie around the end of the Wire
Harness (97). Next, locate the opposite end of
the wire tie, which is extending from the top of
the Right Upright. Pull the wire tie until the Wire
Harness is routed completely through the Right
Upright.
97
98
4
Wire
Tie
3. Orient the Left Upright (96) and the Base (101)
as shown. Attach the Left Upright to the Base
with two M10 x 53mm Patch Bolts (18) and two
M10 Flat Washers (16);
do not fully tighten the
Patch Bolts yet.
96
101
3
18
16
96
101
Wire
Tie
97
98
67
Wire
Tie
All manuals and user guides at all-guides.com
