19
EN
d) Always use undamaged wheel flanges
that are of correct size and shape for
your selected wheel.
Proper wheel flanges
support the wheel thus reducing the possibility of
wheel breakage. Flanges for cut-off wheels may be
different from grinding wheel flanges.
e) Do not use worn down wheels from
larger power tools.
Wheel intended for larger
power tool is not suitable for the higher speed of a
smaller tool and may burst.
ADDITIOnAL SAFETY InSTrUCTIOnS FOr
CUTTInG-OFF OPErATIOnS
a) Do not “jam” the cut-off wheel or apply
excessive pressure. Do not attempt
to make an excessive depth of cut.
Overstressing the wheel increases the loading and
susceptibility to twisting or binding of the wheel in the
cut and the possibility of kickback or wheel breakage.
b) Do not position your body in line with and
behind the rotating wheel.
When the wheel, at
the point of operation, is moving away from your body,
the possible kickback may propel the spinning wheel
and the power tool directly at you.
c) When wheel is binding or when
interrupting a cut for any reason, switch
off the power tool and hold the power
tool motionless until the wheel comes
to a complete stop. never attempt to
remove the cut-off wheel from the cut
while the wheel is in motion otherwise
kickback may occur.
Investigate and take
corrective action to eliminate the cause of wheel
binding.
d) Do not restart the cutting operation in
the workpiece. Let the wheel reach full
speed and carefully re-enter the cut.
The
wheel may bind, walk up or kickback if the power tool
is restarted in the workpiece.
e) Support panels or any oversized
workpiece to minimize the risk of wheel
pinching and kickback.
Large workpieces
tend to sag under their own weight. Supports must be
placed under
the workpiece near the line of
cut and
near the edge of the workpiece on both sides of the
wheel.
f) Use extra caution when making a
“pocket cut” into existing walls or other
blind areas.
The protruding wheel may cut gas or
water pipes, electrical wiring or objects that can cause
kickback.
SymBoLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Summary of Contents for WS4701
