manualshive.com logo in svg

Wesco W121E, Manual And Spare Parts List

Share
Download
Wesco W121E Manual And Spare Parts List Download Page 58

2

25

After programming the price for the last program, there are still the following  
parameters:

A: Eco price

This is the decrease in value of the price for economical wash. In other words, the 
amount that the customer is saving by using economic wash.

B: 

Number of coin insertions COIN 1 (up to 60.000)

This parameter is only indicated if it has been programmed in the technical menu 

(COIN COUNT).

C:  Number of coin insertions COIN 2 (up to 60.000)

This parameter is only indicated if it has been programmed in the technical menu 

(COIN COUNT).

D: Info manufacturer or technician

TMP T/N : Info manufacturer or technician.

Here you can program the temperature to appear on display in case this has not 
been done at the technical menu.

When all desired programs are provided with the right price, end the operation by 
pressing the push button or pulling over the coin meter switch-lever.

Summary of Contents for W121E




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands