Wesco W121E, Manual And Spare Parts List

Page: 32 / 179

7
A
B
Label 16
Maintenance instruction of the machine
WARNING
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any user maintenance. Turning
the controls to the OFF position does not disconnect this appliance
from the power supply.
Important
- Clean the drainpipe every 6 months in case drain (B) is used.
- The water still being in the drain needs to be drained using drain (A)
before cleaning the drainpipe or replacing the exhaust valve.
❏
Clean the entire cabinet of the machine regularly and remove all traces of soap,
etc....
❏ Remove all detergent residue in the soap dispenser with hot water.
❏
Clean the door gasket and remove all detergents and other products.
❏
Shut off the main water, steam, and power connections at the end of each day. Do
not change the setting of the water inlet taps on boiler fed machines once these
have been installed.
❏
It is recommended to leave the door and soap dispenser open after use, to
ventilate the machine.
❑ Check for proper door lock operation on a daily basis.
General maintenance
❏ The V-belts of the motors should be retightened after two to three months when
first used. This is necessary because these belts are subject to a one-time
stretching when first used.
If this is not done, the belt starts to slip after a few
months and will break shortly afterwards.
❏ Check the water inlet filters to make sure they are not blocked by calcification.
❏ Check the drain valve for obstructions.
❏
If a machine frequently skips the final spin, check whether the probe of the out of
balance switch is still in the appropriate position, that is horizontally centered and
vertically 1/3 from the bottom inside the window. (When the drum is empty).
Periodical maintenance
❏
Clean AC drive filter:
a. Snap off external plastic cover which contains filter.
b. Remove foam filter from cover.
c. Wash filter with warm water and allow to air dry. Filter can be vacuumed clean.
End of day