Wesco W121E, Manual And Spare Parts List

Page: 56 / 179

B
A
2
23
Cool-down
This function allows for gradually lowering the temperature of the wash bath to
prevent creasing of the linen.
During a cool-down, the remaining program time on the central display will be
replaced by “ cd ”.
Power Failure
Should the power fall out during the program, the water will be drained and the
door can be opened after maximum 3 minutes. When the door remains locked,
and the power comes back up within 24 hours, the program will continue from
where it was at the time of the power failure.
If due to breakdown, the door is not unlocked automatically, you have to remove
the service panel (A) below and pull the ring (B), suspended on the left side, while
opening the door.
Important
Central panel control (Option)
Here, payment is done through the central panel and not directly into the
machine. As soon as the payment is done, and a machine has been selected
normally, “STA” appears blinking on the left display . The machine can be
started by pressing the START button or the special START button, which has
been built in on the spot of the coin meter (option).
Before opening the door, check if all the water has been drained from the
tub and that the cylinder has come to a complete stop.
Note
This option can only be used when it has actually been programmed in the
technical menu.(REMOTE START).
For certain versions, PAY can appear on the left display when this operation is not
active.
Therefore, “Remote PAY” was programmed in the technical menu.