WESCO NAVY WMA504EP, Manual

Page: 100 / 186

6.6. SELECTION OF A NEW PROGRAM AFTER THE ORIGINAL PROGRAM
HAS STARTED
It sometimes happens that you press the “START” button before you select the correct
program number. This is not a problem. You can still select a different program number.
Use the navigation buttons UP and DOWN to choose the required program.
NOTE:
THE TIME FOR SELECTING NEW PROGRAM IS LIMITED.
- OPL version : switching over to a different program can only be done within the first step.
- Coin operated machines : the program selection change can be done within the first 150 s.
The program might require the insertion of more coins. If you do not insert the required
coins, the program returns to the program number which was selected when the START
button was pressed.
6.7. THE ACTIVE PROGRAM
The cycle time will decrease minute by minute and gives you an indication how long it will
take before the cycle is finished.
A Progression bar shows the progression of the wash cycle and the active wash step.
Progression
bar
Program
number
Wash program
name
Remaining time
wash program
Time unit
6.8. ADVANCING A WASH PROGRAM
If the Advancing a wash program function is enabled (item Allow Advance in the Initialization menu):
should you desire to skip a particular step, press the START button.
If the Advancing a wash program function is disabled:
it is possible to skip a wash program step after having switched into the SERVICE INFO,
(see chapter.3.4.)
60