Rocktab U200 User Manual
120 / 151
Host Notification Mode
Host notification mode bypasses the decoder and notifies the host that there has
been a hardware trigger pull. been a hardware trigger pull. In host notification mode,
it is up to the host to initiate an image snap and/or an image ship command. It is
also up to the Host to change to a different trigger mode.
Snap and Ship mode
Snap and Ship mode, allows you to bypass the decoder and send an image directly
to the host. In this mode, one image at a time is captured and sent with each trigger
pull instead of being sent to the decoder. Snap and Ship is useful if you are using
your own decoder.
Setting the 1D/2D Barcode Scanner Symbologies
The barcode scanner is shipped with the default settings shown below. If the default setting matches the
usage, setting symbologies is not required.
Default settings for symbologies:
Symbology
Standard Setting
Linear
UPC-A
Activated
UPC-E
Activated
EAN/JAN-8
Activated
EAN/JAN-13
Activated
UPC-E1
Not Active
UPC-A/EAN-13 Extended Coupon Code
Not Active
GS1 DataBar Omni-Directinal
Activated
GS1 DataBar Limited
Activated
GS1 DataBar Expanded
Activated
Code 39
Activated
Code 128
Activated
ISBT 128
Not Active
GS1-128
Activated
Interleaved 2 of 5
Activated
Matrix 2 of 5
Not Active
NEC 2/5
Activated
IATA 2/5
Not Active
Code 2/5
Not Active
Codabar
Activated
Code 93
Activated
Code 11
Not Active
MSI
Not Active
Telepen
Not Active
Trioptic Code
Not Active
Postal Code
Not Active
Planet Code
Not Active
Korea Post
Not Active
China Post
Not Active
Australian Post
Not Active
