2
English
ENG
CE DECLARATION CONFORMITY.
►
Werku
®
declares that the
WK403150
sander is
in accordance with the European Directives and
Standards 2006/42/CE, 2006/95/CE, 2004/108/CE,
EN55014-1:2017, EN55014-2:2015, EN61000-3-
2:2014, EN61000-3-3:2013, EN62841-1:2015+AC:15
and EN62841-2-4:2014.
La Coruña, 01/11/2020
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
►
Voltage-frequency 230V~50Hz
►
Power 240W
►
Class II
►
Protection index IP20
►
Exhaust
system
►
Speed rate 6000-12000 min
-1
►
6
speeds
►
Base sizes 187x90mm
►
Sandpaper
sizes 230x90mm
►
Orbit diameter 2mm
►
Net
weight 1.9 kg
►
Acoustic pressure LpA <73
dB(A)
►
Respective uncertainity KpA 3 dB(A)
►
Acoustic pressure LwA <84 dB(A)
►
Respective
uncertainity KwA 3 dB(A)
►
Vibration Ah <2.5 m/s²
►
Respective uncertainity Kh 1.50 m/s².
SAFETY INSTRUCTIONS.
►
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
►
Keep all warnings and all
instructions for future reference
►
Accidents can be
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
►
Do not
use this sander for other applications than those
specified in this manual.
WORK AREA SAFETY.
►
Keep work area clean and well lit
►
Cluttered
and dark areas invite accidents
►
Do not handle
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
►
Keep away from children and curious while
operating a power tool
►
Distractions can cause
you to lose control.
PERSONAL SAFETY.
►
Stay alert, watch what you are doing and use
common sense when operating a power tool
►
Do not use a power tool while tired or under
the influence of drugs, alcohol or medicines
►
A
moment of inattention while operating power tools
may cause damage serious personal.
USE PPE’S.
►
Use protection glasses according EN166
►
Use
protection masks according EN149
►
If required by
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
►
Keep your feet on the ground and balance at all
times
►
This enables better control of the power
tool in unexpected situations.
DRESS PROPERLY.
►
Do not wear loose clothing or jewelry
►
Keep
your hair, clothing and gloves away from moving
parts
►
Loose clothes, jewelry or long hair can be
caught in moving parts
►
If there are devices for
connecting means for extracting and collecting
dust, make sure they are connected and properly
used
►
The use of these devices can reduce dust
related hazards.
ELECTRICAL SAFETY.
►
The plug of the power tool must match with the
base of the socket
►
Never modify the plug in any
way
►
Do not use any adapter plug with earthed
power tools
►
Unmodified plugs and matching
bases will reduce the risk of electric shock
►
Avoid
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
►
There
is an increased risk of electric shock if your body
is grounded
►
Do not expose power tools to rain or
wet conditions
►
Water entering the power tool will
increase the risk of electric shock
DO NOT ABUSE THE CORD.
►
Never use the cord to carry, lift or unplug the
power tool
►
Keep the cord away from heat,
oil, sharp edges or moving parts
►
Damaged
or entangled cords increase the risk of electric
shock
►
When operating a power tool outdoors,
use an extension cord suitable for outdoor use
►
The use of an extension cord suitable for
outdoor use reduces the risk of electric shock
►
If the use of a power tool in a damp location is
unavoidable, use a power protected by a residual
current device (RCD)
►
The use of an RCD
reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
►
Make sure the switch is in “off” position before
connecting to the network, or when taking or
carrying the power tool
►
Carrying power tools
with your finger on the switch or plugging in
power tools that have the switch in “on” position
