WERKU WK400740, Original Instructions Manual

Page: 2 / 44

English
ENG
ORIGINAL INSTRUCTIONS
2
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK400740 circular saw
is in accordance with the following Directives and
Standards:
2006/42/CE
2011/65/UE
2004/108/CE
EN60745-1:2009+A11:2010
EN60745-2-22:2011+A11:2013
EN55014-1:2006/+A1:2009/+A2:2011
EN55014-2:1997+A1:2001/+A2:2008
EN61000-3-2:2006/+A1:2009/+A2:2009
EN61000-3-11:2013
La Coruña, 01/09/2021
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power ......................................................... 1250W
Class .................................................................. II
Protection index ........................................... IP20
Speed rate .......................................... 13800 min
-1
Disc measures ............................ 110/125x20 mm
Axis measure .................................................. M6
Net weight .................................................. 3.2 kg
Acoustic pressure LpA ......................... 95 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ........................ 106 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah ......................................... 5.45 m/s²
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear mouth and nose protection
Wear ear protection
Wear hand protection
Double insulation
European conformity
2002/96/CE directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a circular
saw for marble/stone. Read all safety warnings,
instructions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury. Keep all warnings and all instructions
for future reference. Accidents can be avoided in
many cases by recognizing a potentially hazardous
situation before it occurs and by observing appropriate
safety procedures. Operations, such as grinding, wire
brushing, polishing or sanding are not recommended
to be performed with this power tool. Operations for
which this power tool was not designed may create a
hazard and cause personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and dark
areas invite accidents. Do not operate this power tool
near flammable materials. Sparks could ignite these
materials. Keep away from children and curious while
operating a power tool. Distractions can cause you to
lose control.Keep bystanders a safe distance away
from work area. Anyone entering the work area must
wear personal protective equipment. Fragments of
work piece or of a broken disc may fly away and
cause injury beyond immediate area of operation.