6
English
ENG
ORIGINAL
USE INSTRUCTIONS.
►
Before starting up the pressure-washer, we
recommend that you carefully read all of the
instructions as indicated
►
Please respect all
regulations regarding the prevention of accidents,
health and safety directives, laws and applicable
restrictions for work places
►
The pressure-washer
must only be used by persons who have been
instructed in its use and only for the purposes for
which it has been designed.
POWER SUPPLY.
►
Make sure the power supply is adapted to the
requirements shown on the information panel
of the pressure-washer (1)
►
Using the motor at
low voltage will make it operate slowly
►
This will
reduce performance and may cause the motor to
overheat.
EXTENSION CORD.
►
If the working area is at some distance from the
power supply, use an extension cord of enough
diameter and quality.
OIL INLET PLUG.
►
Caution; the red plug on the pump is specially
designed for transportation, before using the
pressure-washer, please replace the red plug with
the yellow plug or the brass plug in the spare parts
package (2).
PRESSURE REGULATOR.
►
The pressure setting is preset at the factory
to achieve optimum pressure and cleaning
►
If
need to lower the pressure, the following methods
can be used:
►
1- Back away from the surface
to be cleaned
►
The further away user is, the
less pressure is on the surface to be cleaned
►
Caution; do not try to increase pump pressure, a
higher pressure setting than the factory pressure
setting may damage the pump
►
2- Change to
the 40° white nozzle
►
This nozzle delivers a
less powerful stream of water and a wider spray
pattern
►
3- Adjust the pressure regulator on the
pump
►
Turn the pressure regulator knob anti-
clockwise to lower the pressure
►
Once you have
finished using your pressure-washer, return the
pressure regulator to its original position by turning
it clockwise
►
Caution; do not try to turn pressure
regulator knob past the built-in stop line, as
otherwise damage to the pump will be resulted.
NOZZLE TYPE.
►
The pressure-washer is equipped with four
spray nozzles
►
Each nozzle has a color and
delivers a specific spray pattern for a particular
cleaning purpose (3)
►
Caution; the high-pressure
spray from the pressure-washer is capable
to cause damage to surfaces such as wood,
glass, automobile paint, car striping and trim,
and delicate objects such as flowers and shrubs
►
Before spraying, check the item to be cleaned
to assure yourself that it is strong enough to resist
damage from the force of the spray.
CHANGING NOZZLES.
►
Caution; do not attempt to change the nozzles
while the pressure-washer is running
►
Turn the
engine or gun off before changing nozzle
►
Pull
quick-fix back and insert nozzle
►
Release quick-
fix and twist nozzle to make sure it is secure
in quick-fix socket (4)
►
Warning; risk of injury
►
Ensure nozzle is completely inserted in quick-fix
socket before turning on gun trigger.
CLEANING NOZZLES.
►
If the nozzle is clogged with dirt, excessive
pressure may develop
►
If the nozzle becomes
partially clogged or restricted, the pump pressure
will pulsate
►
Clean the nozzle immediately using
the nozzle kit supplied and follow-up the following
instructions
►
1- Shut off the pressure-washer and
turn off the water supply
►
2- Pull trigger on the
gun to relieve any water pressure
►
3- Disconnect
the lance from the gun
►
4- Remove the nozzle
from the lance
►
Remove any obstructions with
the nozzle cleaning tool provided and backflush
with clean water (5)
►
5- Direct water supply
into the spray wand end to backflush particles
for 30 seconds (6)
►
6- Reassemble the nozzle
to the lance, ensuring the fix-up is secure
►
7-
Reconnect lance to the gun and turn on water
supply
►
8- Start the pressure-washer and place
lance into high pressure setting to test.
OPERATING INSTRUCTIONS.
►
Important; before operation, check if every nut
and bolt are tight enough and check whether the
supply power and water can meet the demand of
pressure-washer
►
It is also important to check water
filter before using the pressure-washer
►
Important;
a well-cleaned filter means good performance and
long life for the pressure-washer
►
Connect the
