Page 9
MODEL 09-0101: 1-POINT PEN PROBE
MODEL 09-0102: 2-POINT PEN PROBE
INTRODUCTION
The WENVY
TM
09-0101, 09-0102 and 09-0103 Pen
Probes work with most megohm meters, electrometers
and other high potential resistance meters in most
Resistance Kits for measuring Surface Resistance and
Volume Resistance of materials with physical dimensions
too small for regular concentric ring or other probes. The
size, portability and construction make these probes
convenient for auditing small samples of materials in the
field and yet their design specifications make these
instruments precision enough for laboratory environments.
09-0101, 09-0102 and 09-0103 Pen Probes use spring
loaded electrodes with conductive rubber boots to ensure
intimate contact with hard/irregular surfaces and reduce
contact resistance. All electrodes are field-replaceable,
spring-loaded, pogo-pin type ATE-quality probes that are
made of beryllium copper with minimum 60 micro-inch
hard gold.
The 1-Point Pen probe can be used for measuring volume
resistance of small planar material sample per the
requirements of ANSI/ESDA 11.12 or measuring
resistance to ground of materials or component on a piece
of equipment.
Direct point-to-point resistance measurements with
WENVY 2-Point Pen Probe, 09-0102, generally conform
to the guidelines as outlined in the ANSI/ESDA 11.13 2-
Point Resistance Measurements.
The 2-Point Pen probe uses a thin line BNC coaxial cable
with inner source and outer sense connections to
minimize reading errors due to electrostatic interference.
The BNC to banana jack adapter allows connection to
most popular meters in the market.
