Page 12
Procedures:
1. Place sample to be tested on a conductive
platform such as stainless steel or copper plate.
2. For best result, the platform should be thick
enough to accommodate a hole for a banana jack.
3. Connect the negative (-) terminal to the test
platform.
4. Plug one end of the coiled cord, provided with the
09-0101 kit, to the 1-Point Pen Probe.
5. Connect the other end of the coiled cord to the
positive (+) terminal of your megohm meter. If
your meter comes with cables that end with a
banana plug, use that cable and plug into the 1-
Point Pen Probe.
