http://www.wenshing.com.tw; http://www.rf.net.tw
RS232 Hi Power Data Sheet P.5
Command Summary
COMMAND
Send Value
Back Value
Remark
0x80
(Product info)
0x80
TRW-909V100
0x81
(Set RF
transmission
rate )
0x81+1 byte
(0x00~07)
Correct setting will return
send value; incorrect setting
will have no back value.
1 byte setting,
default value is 0x07.
0x83
(Set ID)
0x83+1 byte
(0x00~FF)
Correct setting will return
send value; incorrect setting
will have no back value.
1 byte setting,
default value is 0x00.
0x84
(Set power
consumption)
0x84+1 byte
(0x00~14)
Correct setting will return
send value; incorrect setting
will have no back value.
1 byte setting,
default value is
0x07=100mW.
0x85
(Set RS232 rate)
0x85+1 byte
(0x00~07)
Correct setting will return
send value; incorrect setting
will have no back value.
1 byte setting,
default value is
0x07=115200bps.
0x86
(Set link mode)
0x86+1 byte
(0x00 or 0x01)
Correct setting will return
send value; incorrect setting
will have no back value.
1 byte setting,
default value is
0x01=RS232 Modem.
0x87
(Set group ID)
0x87+2 bytes
(0x0000~FFFF)
Correct setting will return
send value; incorrect setting
will have no back value.
2 bytes setting,
default value is 0x0000.
0x8D
(Detect interface
rate)
0x8D+72 bytes
(Only 0x8D)
Correct setting will return
send value; incorrect setting
will have no back value.
Repeat 0x8D and total
are 72 bytes,
repeat
sending
and
switch
interface rate until it
return send value.
0x8F
(Cancel transfer
station)
0x8F+72 bytes
(Only 0x8F)
Correct setting will return
send value; incorrect setting
will have no back value.
Repeat 0x8F and total
are 72 bytes,
if you
received return send
value after sent value, it
is meaning you already
cancel transfer station.
0xC0
(Preset transfer
station)
0xC0+1
～
11
bytes
(0x00
～
FF)
Correct setting will return
send value; incorrect setting
will have no back value.
Min: 1 byte,
Max: 10 bytes.
Please use COM Demo program which WENSHING opened to send Hex code
which format command is 16bytes and amend to RS232 Hi Power.(Initial setting
for interface rate is 115200bps.) When user amended success, RS232 Hi Power
will automatically reply parameters
for user’s confirmation. After successful
setting, user can begin to use.
