Wenshing RD-485, Instruction Manual

Page: 14 / 17

http://www.wenshing.com.tw ; http://www.rf.net.tw RD-485 Instruction Manual P.14
General Communication Mode

Choice RS485 or RS232 ports to be information communication.

Allocate to 4 Switch "ON" state, and it is the choice of RS485 port or choose
RS232 ports only.

The port set up a total of eight kinds of work rate option, please refer to P.11
Table 1.In normal working condition, it changes its means for switching the
location, RD-485 will automatically update the rate set port.

Connect the power cord and a good port and power lines.

Press the button set into the mode of all groups within the RD-485 RF work
rate and the frequency set to work, otherwise it will not be able to send
information.

After re-electricity, RD-485 will automatically call the last set of work rate and
frequency, as the current work rate and frequency.

Through the port to send data to the RD-485, its members only in the
receiving group within the scope of its information can be received and
transmitted through its port user group.
Installation

Add to Industrial Control Box Aluminum Track

Step 1

Step 2
WENSHING
Confidential
Do
Not
Distribution