http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-485
Instruction Manual P.13
Directive location information I
(frequency settings)
Directive location information J
(frequency settings)
BIT7
BIT6
BIT5
BIT4
BIT3
BIT2
BIT1
BIT0
0
0
0
1
0
0
0
0
Directive location information K
(frequency settings)
Directive location information L
(frequency settings)
BIT7
BIT6
BIT5
BIT4
BIT3
BIT2
BIT1
BIT0
0
0
0
0
1
0
1
0
Directive location information M
(RD-485 ID)
Directive location information N
(RD-485 ID)
0
0
0
0
0
0
0
0
Directive location information O
(packet length)
Directive location information P
(packet length)
Command Communication Mode
Read equipment parameters of command:
Send value = 0x1234567868ACFD
Return value= 03 01 69 54 02 00
03=wireless transmission rate (9600 Kbps), 01 69 54= equipment frequency
(925 MHz), 02 = equipment ID code (2), 00= Un-constant pack length.
Read RSSI parameters of command:
Send value = 0 x1234567868ACFE
Return value = BC
BC = RSSI value
Sleep Mode parameters of command:
Send value = 0 x1234567868ACFF
After the equipment sent immediately into Sleep Mode as long as the serial
received information will be automatically wake-up equipment into Standby
Mode.
Point-to-point transmission mode parameters of command:
Send value = 0 x1234567868AC0000SSTTDDDDDDDDD
SS is on behalf of the RD-485 for the ID number,
TT is on behalf of the ID number of receiver.
DDDD is on behalf of data (not set this mode, RD-485 are broadcasting
operation.)
WENSHING
Confidential
Do
Not
Distribution
