21
Temperature Sensor for Contactless Temperature Measurement
7.6. SP1 (set switching point or switching temperature 1)
Set the switching point for switching output A1/ .
Setting
Description
Value in °C (°F)
Switching Temperature 1
Value within a range of –25…350° C (–13…662° F).
Mode key LED / switching status indicator lights up when set to ON.
7.7. OFn1 (select output function)
Select the output function for switching output A1/ .
Setting
Description
PnP
PNP Output
The load is connected between the minus pole and the output. When switched, the
output is connected to the plus pole via an electronic switch.
nPn
NPN Output
The load is connected between the plus pole and the output. When switched, the
output is connected to the minus pole via an electronic switch.
7.8. SL1 (select switching logic)
Select switching logic for switching output A1/ .
Setting
Description
no
Normally Open (NO)
The switching output is set to ON when the measured object temperature is higher
than the selected switching point (SP1).
The switching output is set to OFF when the measured object temperature is lower
than the selected switching point (SP1).
nc
Normally Closed (NC)
The switching output is set to ON when the measured object temperature is lower
than the selected switching point (SP1).
The switching output is set to OFF when the measured object temperature is higher
than the selected switching point (SP1).
