33
SIG LOW/
DIAG4
DIAG3
EDM/DIAG2
SYNC/DIAG1
ERROR
RES
OSSD OFF
OSSD ON
SIG LOW/
DIAG4
DIAG3
EDM/DIAG2
SYNC/DIAG1
ERROR
RES
OSSD OFF
OSSD ON
SIG LOW/
DIAG4
DIAG3
EDM/DIAG2
SYNC/DIAG1
ERROR
RES
OSSD OFF
OSSD ON
SIG LOW/
DIAG4
DIAG3
EDM/DIAG2
SYNC/DIAG1
ERROR
RES
OSSD OFF
OSSD ON
1
OSSD On
Ideally Aligned
2
OSSD On
Weak Signal
3
OSSD Off
Inadequately Aligned
4
OSSD Off
Incorrectly aligned
Display at Receiver
Display at Receiver
Display at Receiver
Display at Receiver
5.10 Diagnostics
Conduct in case of fault:
NOTE!
• Shut down the machine.
• Analyze and eliminate the cause of error on the basis of the diagnostics information
(see section
(see section “12.4 Display in Case of Error” on page 65)
• If the error cannot be eliminated, please contact wenglor’s support department.
DANGER!
Risk of personal injury or property damage in case of non-compliance!
The system’s safety function is disabled. Personal injury and damage to equipment.
• Do not operate in case of indeterminate malfunctioning.
• The machine must be shut down if the error cannot be unequivocally clarified or reliably
eliminated.
• Conduct in case of fault as specified
• Displays which appear during normal operation are included in the appendix
(see section “12.3 Display during Normal Operation” on page 62)
.
• Displays which appear in the event of an error are included in the appendix
(see section “12.4 Display in Case of Error” on page 65)
.
Summary of Contents for SEMG412
Page 75: ...75 ...