14
EN
6. Installation Instructions
During use of the sensor, applicable electrical and mechanical regulations, standards and safety precautions
must be adhered to. The sensor must be protected against mechanical influences.
When installing the sensor it must be ensured that direct eye contact with the laser beam is avoided. The laser
warning must be plainly visible.
When installing the sensor it must be ensured that the measuring beam is exactly perpendicular to the surface
to be measured in order to assure accurate measurement results. Tilting results in a geometrically longer
measuring path.
Moving or Striped Objects
If moving or striped objects will be measured, the sensor head should be mounted with its long side perpen-
dicular to the motion of direction or the stripes. In this way, better measurement results can be achieved in the
corners because shadowing is avoided:
falsch
wrong
richtig
correct
