15
OPT2022
6.2. Function Definitions
Name
Function
Page
Run
Change to display mode
Pin-Function
Selection of pin function
Windows-Teach-in
Teach-in with window width (tolerance)
Sample-Teach-in
Automatic tolerance adjustment based on a good part or a bad
part.
Tolerance
Window size for window teach-in
Output function
Selection of NO or NC
Switching Thresholds
Manual shifting of the thresholds
Error or Contamination Output
An output which is activated when the sensor is within an
unreliable range
Display
Display settings
6.3. Menu structure
• Connect the sensor to the supply voltage. After initialization the sensor shows the indication screen and is
ready for operation. During the first commissioning you can first of all select the menu language by simply
pressing a button.
• Switch to the configuration menu by pressing any key.
NOTE!
If no setting is made in the configuration setting for a duration of 30 s, the sensor automatically jumps
back into the display view. By pressing the button once again, the sensor jumps back to the menu
view used last. Settings made are adapted when quitting the configuration menu.
The keys are used for navigation, and for configuring settings. The functions of the navigation keys vary from
menu to menu. The functions of the keys appear in the display as follows:
5
: Navigate up.
6
: Navigate down.
|
: Selection is acknowledged with the enter key.
Back: One level up in the menu.
7
Run: Change to the display mode
ATTENTION!
Risk of property damage if sharp objects are used!
The keys may be damaged.
– Do not use sharp objects in order to enter settings.
