17
OPT2022
7. Settings
7.1. Causes for Triggering of Error Indication (display)
1 2 3 4 5
6 7 8 9 10
11 12
• Not enough light is reflected.
• Very small objects, or objects which do not reflect well, are located within the working range.
• Incorrect installation
• Object is outside of the working range.
7.2. Run
Sensor switches to display mode.
Set pin function A with correspond-
ing condition. If A is not
displayed, it is deactivated in the
pin function menu item.
Display of the current
signal strength.
…
Legend Status-LEDs:
Meaning
Condition 1
Condition 2
Condition 3
Condition 4
Switching Output
Switched
Not switched
–
–
Error Output
Ok
No signal
–
–
Contamination
Output
Ok
Signal too low
–
–
Signal Strength
Ok
Signal too low
Signal too high
No signal
temperature
Ok
temperature too
low
temperature too
high
–
