3
A
SSEMBLY
W
ITH
O
PTIONAL
I
NFILL
P
ANELS
(
CONTINUED
)
5. Attach the Middle Rail to both
Upright Weldments using
a 3/8-16 x 3-3/4” Carriage Bolt
through the Tube Saddle
and an 3/8-16 Acorn Nut as
previously described.
6. Secure the Top and Bottom Infill Panels to the Rails using
evenly distributed Spacers and Nylon Ties as shown.
a. Orient the Nylon Tie
with the head towards
the bottom of the assembly.
b. After the Nylon Tie has
been tightened, trim off
any excess to be flush
with the head.
Spacer
Nylon
Tie
Tube
Saddle
Middle
Rail
3/8-16
Acorn Nut
3/8-16 x 3-3/4”
Carriage Bolt
Head Towards
Botttom
and Trim Off
Excess
Head of
Nylon Tie
