![background image](http://html.mh-extra.com/html/wen/vc9209/vc9209_instruction-manual_956607010.webp)
ASSEMBLY & ADJUSTMENTS
ASSEMBLING THE VACUUM
1. Ensure the unit is unplugged from its power source and
the power switch is in the OFF position.
2. Pull out on the two side tabs (Fig. 1 - 1) and remove the
top cover of the vacuum (Fig. 1 - 2) to find the additional
accessories inside the bucket (Fig. 1 - 3). Remove and set
them aside.
3. Turn the bucket upside down and assemble the four
wheel assemblies (Fig. 2 - 1) onto the bucket by inserting
them into the proper slots on the bucket and securing each
of them with a ST3.9x20 screw (Fig. 2 - 2).
4. Replace the top cover and attach the hose to either the
suction inlet (Fig. 3A - 1) or the blower outlet (Fig. 3B - 1)
depending on your desired use. Lock the hose by inserting
it into the respective port and twisting it about 1/8 turn
clockwise. The suction / blow function can be changed
easily by removing the hose and connecting it to the op-
posite port.
5. Extension tubes or accessories can be easily connected
to the end of the handle by firmly pressing and firmly twist-
ing the accessory to ensure a secure fit (Fig. 4A - Fig. 4C).
Fig. 1
1
Fig. 2
10
2
3
1
2
Fig. 3A
Fig. 3B
1
1