background image

3

SPECIFICATIONS

Model Number

RT6033

Motor

120V, 60Hz, 15A

Variable Speed

8,000 - 23,000  RPM

Collet Size

0.5 Inches

Adapter Size 

0.25 Inches

Net Weight

18 lbs

Product Dimensions

12.5" x 6.2" x 12.7"

INTRODUCTION

Thanks for purchasing the WEN Electric Router. We know you are excited to put your tool to work, but first, please 

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this 

operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety 

concerns, as well as helpful assembly and operating instructions for your tool. 

NOTE:

 The following safety information is not meant to cover all possible conditions and situations that may occur. 

WEN reserves the right to change this product and specifications at any time without prior notice.

At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual, 

please visit 

wenproducts.com

 for the most up-to-date manual or contact our customer service at 

1-800-232-1195

.

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize 

safety for both yourself and others. 

SAFETY ALERT SYMBOL: 

Indicates danger, warning, or caution. The safety symbols and the explanations 

with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the 

risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not 

substitutes for proper accident prevention measures. 

INCLUDED ACCESSORIES

Carrying Case...................................

Straight Guide Fence.........................

Fence Pole.........................................

Fence Pole Scale...............................

Centring Pin......................................

Template Guide.................................

1

1

2

1

1

1

Profile Guide.....................................

Dust Extraction Duct (1.5")...............

0.5" Collet & Nut Assembly...............

0.25" Router Bit Shank Adapter.........

Wrench.............................................

1

1

1

1

1

Summary of Contents for RT6033

























Reviews: