SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Benchtop Jointer. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE:
The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit
wenproducts.com
for the most up-to-date manual or contact our customer service at
1-800-232-1195
.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your
careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock
or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-
cident prevention measures.
3
Motor
120V, 60 Hz, 10A
Cutterhead Rotation Speed
11,000 RPM
Max Cutting Width
6 Inches
Max Cutting Depth
1/8 Inch
Recommended Cutting Depth* 1/32 Inch
Number of Blades
2
Table Size
30 in. x 6-3/16 in.
Fence Size
4-1/4 in. x 19-3/4 in.
Dust Port Diameter
2-1/2 Inches
Fence Bevel
90-135°
Product Dimensions
30 in. x 17.5 in. x 12.5 in.
Weight
41.1 lbs
*When jointing boards over 6 inches long, reduce maximum cutting depth by 1/32 inch per inch of length.
Summary of Contents for JT3062
Page 23: ...23 NOTES...
