background image

INTRODUCTION

Thanks for purchasing the WEN Heat Gun. We know you are excited to put your tool to work, but first, 

please take a moment to read through the manual. Safe operation of this tool requires that you read and 

understand this operator’s manual and all the labels affixed to the tool. This manual provides information 

regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. 

NOTE:

 The following safety information is not meant to cover all possible conditions and situations that 

may occur. WEN reserves the right to change this product and specifications at any time without prior 
notice.

Keep this manual available to all users during the entire life of the tool and review it frequently to 

maximize safety for both yourself and others. 

SAFETY ALERT SYMBOL:

 Indicates danger, warning, or caution. The safety symbols and the 

explanations with them deserve your careful attention and understanding. Always follow the safety 
precautions to reduce the risk of fire, electric shock and personal injury. However, please note that 
these instructions and warnings are not substitutes for proper accident prevention measures. 

3

Summary of Contents for HG1022

















Reviews: