KNOW YOUR INVERTER GENERATOR
CONTROL PANEL
1
3
6
7
8
9
10
12
13
1. Data Meter with Indicator Light
2. Eco-Mode Switch
Turn ON to increase fuel economy and runtime when the
load is below 2625W.
3. Parallel Connection Port
Connect two WEN inverter generators through a parallel
connection kit for a higher output.
4. Remote Pairing Button
Use this button to pair the remote and generator. See
"REMOTE START" section (pages 22 - 23).
5. Engine Start / Stop Button
Use this button to start or stop the generator. The button
will also flash different colors to provide important infor-
mation about your generator. See "Starting Your Genera-
tor" (p. 20) and "Shutting Off Your Generator" (p. 33).
6. DC 12V Cigarette-Lighter Style Receptacle
7. LPG Inlet
8. Grounding Nut
Ground generator to reduce risk of electric shock.
11
2
4
5
11
9. DC Circuit Breaker (10A)
10. AC 120V NEMA TT-30 RV Receptacle
11. AC Circuit Breaker (20A)
12. AC 120V NEMA 5-20R Receptacles
13. Overload Reset
If the overload light is ON, press this button to reset.
14. Battery Switch
Control whether or not the battery is connected to the
control panel. Always turn battery switch OFF to con-
serve power after shutting down generator. You can also
shut down generator by turning the battery switch OFF.
15. 2-in-1 Switch
Turn switch to run or automatically shut off generator.
16. CO WATCHDOG Carbon Monoxide Monitor
Measures the accumulation of poisonous CO gas while
the generator is running. If the level of CO gas gets too
high, the CO Watchdog system will automatically shut
down the generator.
15
16
14