10
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the belt / disc sander from the packaging. Make sure to
take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing
list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact
our customer service at
1-800-232-1195
(M-F 8-5 CST), or email
PACKING LIST
A. Belt Table (1)
B. Disc Table (1)
C. Miter Gauge Assembly (1)
D. 3mm Hex Wrench (1)
E. Belt Table Locking Lever (1)
F. Washer, Locking Lever(1)
G. Washers, Disc Table Knob (2)
H. Screws, Disc Dust Port (3)
I. Disc Dust Port (1)
J. Belt Dust Port Adapter (1)
K. Disc Table Locking Knobs (2)
The items listed below are not
included but are required for either
assembly or adjustment.
1. Square
2. Dust Collection System
UNPACKING & PACKING LIST
A
B
C
D
E
F
G
H
I
J
K
WARNING!
Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.