background image

LIMITED TWO YEAR WARRANTY

WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with 
this commitment and our dedication to quality.

LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE 
GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN 
consumer power tools will be free from defects in material or workmanship for a period of two (2) years from 
date of purchase. Ninety days for all WEN products, if the tool is used for professional use.

SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, 
to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement 
of parts, without charge, which are defective in material or workmanship and which have not been misused, 
carelessly handled, or misrepaired by persons other than Seller or Authorized Service Center. To make a 
claim under this Limited Warranty, you must make sure to keep a copy of your proof of purchase that clearly 
defines the Date of Purchase (month and year) and the Place of Purchase. Place of purchase must be a di-
rect vendor of Great Lakes Technologies, LLC. Third party vendors such as garage sales, pawn shops, resale 
shops, or any other secondhand merchant void the warranty included with this product.  Contact techsup-
[email protected] or 1-800-232-1195 to make arrangements for repairs and transportation. 

When returning a product for warranty service, the shipping charges must be prepaid by the purchaser. The 
product must be shipped in its original container (or an equivalent), properly packed to withstand the hazards 
of shipment. The product must be fully insured with a copy of the warranty card and/or the proof of purchase 
enclosed. There must also be a description of the problem in order to help our repairs department diagnose 
and fix the issue. Repairs will be made and the product will be returned and shipped back to the purchaser at 
no charge.

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS THAT WEAR OUT 
FROM REGULAR USAGE OVER TIME INCLUDING BELTS, BRUSHES, BLADES, ETC. 
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR FROM 
DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT 
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE 
LIMITATION MAY NOT APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 
DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING 
FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CA-
NADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 
APPLY TO YOU.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO 
HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO 
PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE ELECTRIC TOOLS, BENCH POW-
ER TOOLS, OUTDOOR POWER EQUIPMENT AND PNEUMATIC TOOLS SOLD WITHIN THE 
UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. 
FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT THE WEN CUSTOM-
ER SUPPORT LINE.

15

Summary of Contents for 61741

















Reviews: