background image

iMPOrTANT SAFETY ruLES

VIbRaTION SafETy

This tool vibrates during use. repeated or long-term exposure to vibration may cause temporary or permanent 
physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injuries:

1. First be examined by a doctor and then have regular medical check-ups to ensure medical problems are not 
being caused or worsened from using this tool. People who are pregnant, have impaired blood circulation to the 
hand, past hand injuries, nervous system disorders, diabetes, or raynaud’s disease should NOT use this tool. 

2. if you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), stop 
working and seek medical advice as soon as possible. 

3. Wear suitable work gloves to reduce the effects of vibration.
 
4. When working in cold environments, wear warm clothing and keep your hands warm and dry.

5. Hold the tool firmly enough to keep safe control of it, but NOT too tightly. The risk associated with vibration 
is increased when the gripping force is high. Let the tool do the work.

6. do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of 
vibration-related injury.

7. Take vibration-free breaks during each day of work.

8. To reduce vibration, maintain the tool as instructed in this manual. if any abnormal vibration occurs, stop 
using the tool immediately

9. release the trigger when you raise the tool to change its position. Otherwise strong vibrations can occur 
when you lift up the tool.

TOOl MaINTENaNCE

1. Always disconnect the air supply before making adjustments or performing maintenance on the tool. 

2. do not alter or modify the tool in any way. do not remove, tamper with, or otherwise cause the tool, trigger 
or safety bracket to become inoperable. do not tape, tie, or otherwise fasten the trigger in the ON position. 
do not remove springs from the safety bracket. Make daily inspections for free movement of the trigger and 
safety bracket. 

3. Maintain the tool properly. Always keep the tool and attachments clean and in good working order. Follow 
maintenance instructions for lubricating, cleaning and storage. 

4. Have your tool serviced by a qualified repair person using only identical replacement parts. 

5. Store tools and attachments out of the reach of children and do not allow persons unfamiliar with the tool 
or these instructions to operate the tool. Pneumatic tools are dangerous in the hands of untrained users.

6

Summary of Contents for 61635

















Reviews: