background image

TURNING ON/OFF AND SETTING THE SPEED (Fig. 4 & 5) 

The air filtration system can be operated using the control panel or with the remote control. 

1. Plug the power cord into an appropriate power source.

2. Press the ON/SPEED button on the control panel (Fig. 4 - 1) or the remote control (Fig. 5 - 1) to power on the air 
filtration system. The air filtration system will start running at low speed. The “LO” LED will light up on the panel, 
indicating that the unit is operating at low speed.

3. The ON/SPEED button also controls the three different settings of the unit. Press the button to change the speed. 
The LED lights (Fig. 4 - 3) on the control panel will light up to indicate the selected speed - low speed (LO), medium 
speed (MID) or high speed (HI).

4. Press the OFF button on the control panel (Fig. 4 - 2) or the remote control (Fig. 5 - 2) to turn off the unit.

SETTING THE TIMER (Fig. 4 & 5) 

The timer function allows you to set the length of time (1, 2 or 4 hours) that the air filtration system will operate 
before shutting itself off automatically. The timer can only be set using the remote control. 

1. Press the TIMER button (Fig. 5 - 4) on the remote control to start the timer. The cycle is 1 hour, 2 hours, 4 hours 
and clear the timer.

2. The LED lights (Fig. 4 - 4) on the control panel will indicate the amount of time selected. The unit will shut off 
automatically after the selected time interval elapses. When you clear the timer (no timer lights are showing), the air 
filtration system will keep running until it is turned off manually by pressing the OFF button.

OVERLOAD PROTECTOR

The overload protector (4-Amp) shuts down the motor when it is overloaded. When this happens, let the motor 
cool down for a few minutes and press the overload protector button (Fig. 4 - 5) to reset. Dirty filters may cause the 
unit to overload. Check the filters regularly and replace as necessary (see page 9 “Changing the Filters”).

OPERATION

1H

2H

4H

HI

MID

LO ON/SPEED

OFF

AIR FILTRATION SYSTEM

HEAVY DUTY REMOTE-CONTROLLED

OFF

TIMER

ON/SPEED

1H

2H

4H

HI

MID

LO ON/SPEED

OFF

AIR FILTRATION SYSTEM

HEAVY DUTY REMOTE-CONTROLLED

OFF

TIMER

ON/SPEED

2

4

1

2

1

5

4

3

Fig. 5

Fig. 4

8

Summary of Contents for 3415













Reviews: