WARNING:
Styrofoam blocks are installed around the motor inside the cabinet for shipping. The sty-
rofoam must be removed before operation. Take off the outer and inner air filter from the back of the
unit and remove the styofoam blocks around the impellor (See page 7 “Remove the Styrofoam Blocks”).
6
KNOW YOUR AIR FILTRATION SYSTEM
UNPACKING
Carefully unpack the air filtration system and all its parts. Check all components and compare against the list below.
Do not discard the carton or any packaging until the air filtration system is completely assembled. If any part is dam-
aged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST.
1
3
2
4
5
6
7
8
9
1.
2.
3.
4.
5.
6.
Mounting Hangers
Mounting Brackets
Control Panel/Receiver
Overload Protector Reset Button
Power Cord
Remote Control
• Air Filtration System
with Inner and Outer Filters Installed
• Mounting Hangers (4)
• Mounting Brackets (4)
• Hex Wrenches (2)
• M6 X 4.8 Bolts (8)
• M6 Flat Washers (8)
• M6 Lock Washers (8)
• Rubber Feet (4)
• Remote Control
• AAA Batteries (2)
• Instruction Manual
Carrying Handle
Outer Filter
Filter Lock Clip
NOT SHOWN:
Inner Filter (Installed on the
inside of the machine)
7.
8.
9.
10.
6