background image

MAINTENANCE

Proper routine maintenance of the pressure washer will help prolong the life of the machine.  Please 

perform maintenance checks and operations according to the schedule in the chart below.

If there are any questions about the maintenance procedures listed in this manual, please call:

(800)-232-1195 M-F 8-5 CST.

CAUTION:

 Never perform maintenance operations while the pressure washer is running.

Recommended

Maintenance Schedule

Each 8 

hours or 

daily

First 8 

hours

Every 25 

hours

Every 3 

months or 

50 hours

Every 6 

months or 

100 hours

Every 

year

As 

necessary

Engine oil

Check 

level

x

Replace

x

x*

x*

x

Air cleaner 

cartridge

Check

x

x

Clean

x

Spark plug

Check/

clean

x

Change

x

x

Fuel tank

Check 

level

x

Clean

x

Spark 

Arrestor Clean

x

* Clean/change more often under dusty conditions or when operating under heavy load.

PRE-OPERATION STEPS

Before starting the engine, perform the following pre-operation steps:

1. Check the level of the engine oil and the fuel tank.

2. Make sure the air filter is clean.

3. Remove any debris that has collected on the pressure washer.

4. Check high pressure hose for damage.

5. Briefly run garden hose to flush out any debris or insects.

6. Inspect the work area for hazards.

7. Clean any debris that has collected around or behind the muffler, air cleaner and controls.

8. Use a damp cloth to wipe exterior surfaces. If dirt is caked on, use a soft bristle brush.

17

Summary of Contents for 3200-PSI























Reviews: