![background image](http://html1.mh-extra.com/html/wen/31110/31110_instruction-manual_956234007.webp)
ASSEMBLY
7
WARNING:
Read the instructions before beginning to assemble the scaffolding. Scaffold components
and replacement parts from other manufacturers must not be used with this particular model. Parts
should fit together without being forced, otherwise the structural integrity may be compromised.
Assembly and adjustments of the scaffolding requires two people. Get a good friend
(or a trustworthy foe) to help you.
MOUNTING THE CASTERS (Fig. 1)
1. Mount the four swivel casters (5) to the bottom of each
end frame by sliding the casters into their respective legs.
2. Secure the casters in place using a locking pin (4). Then,
snap the pin spring around the end of the locking pin to
keep it in place.
3. Lock the swivel casters in place by pressing down on the
end of the caster plate marked “ON”. Pressing down on
the end marked “OFF” unlocks the caster for movement.
MOUNTING THE SIDE RAIL (Fig. 2)
1. Slide a side rail (1) onto the end frames (2) and secure it
into place using two L-shaped pins (7). The L-shaped pins
must be fully engaged in the holes of the frame.
2. Further secure the frames with a locking pin (4) on each
side of the side rail.
3. Repeat to install the other side rail onto the other side of
the end frames. Both side rails must be positioned at the
SAME HEIGHT on the frames so that the platform will
be level. Check the rails’ level with a bubble level or other
instrument (not included).
4. Check to make sure all four L-shaped pins (7) and four
locking pins (4) are properly installed.
TO ENGAGE/DISENGAGE THE L-SHAPED
PINS (Fig. 3)
1. To disengage the L-shaped pin:
Pull out the L-shape pin at each end of the side brace to
disengage it and adjust the platform height.
2. To engage the L-shaped pin:
Release the L-shaped pin and be sure that pin fully en-
gages into holes in the frame.
WARNING:
Make sure the L-shaped pins
are fully locked before operation.
6
7
6
7
Fig. 1
Fig. 2
Fig. 3