background image

WEN Products is committed to build tools that are dependable for years. Our warranties 

are consistent with this commitment and our dedication to quality
LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME 

USE  

GREAT LAKES TECHNOLOGIES, LLC ("Seller") warrants to the original purchaser only, 

that all WEN consumer power tools will be free from defects in material or workmanship 

for a period of one year from date of purchase. Ninety days for all WEN products, if the 

tool is used for professional use.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited 

Warranty and, to the extent permitted by law, any warranty or condition implied by law, 

shall be the repair or replacement of parts, without charge, which are defective in material 

or workmanship and which have not been misused, carelessly handled, or misrepaired by 

persons other than Seller or Authorized Service Center. To make a claim under this Lim-

ited Warranty, you must return the complete power tool product; transportation prepaid, 

to Great Lakes Technologies, LLC – 501 Davis Road – Elgin, IL. 60123 with a copy of the 

original receipt which is  

legible and clearly defines Date of Purchase including month and year and Place of 

Purchase.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS 

CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING 

BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM 

DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO 

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSE-

QUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF 

PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES 

IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION 

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., 

PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE ELECTRIC TOOLS, 

BENCH POWER TOOLS, OUTDOOR POWER EQUIPMENT AND PNUMATIC TOOLS 

SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMON-

WEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUN-

TRIES, CONTACT THE WEN CUSTOMER SUPPORT. 

WARRANTy

Summary of Contents for 2301



















Reviews: