Wemars WS-ST42G, Instructions Manual

Page: 7 / 21

4. Do a check of the throttle trigger and throttle trigger
lockout move freely and that the return springs work
properly.
5. Start the product and apply full throttle.
6. Release the throttle and make sure that the cutting
attachment stops and remains at a standstill. If the
cutting attachment rotates with the throttle in the idle
position the carburettor idle setting must be checked.
See instructions under the chapter .
To do a check of the stop switch
1. Start the engine(
I-open )
2. Move the stop switch to the stop position and make
sure that the engine stops.( O-stop )
To do a check of the cutting attachment guard
WARNING: Do not use a cutting attachment
without an approved and correctly attached
cutting attachment guard.
WARNING: Always use the recommended
cutting attachment guard for the cutting
attachment that you use. If an incorrect or
faulty cutting attachment guard is fitted this
can cause serious personal injury.
The cutting attachment guard prevents injuries from
objects that eject in the direction of the operator. It also
07
prevents injuries that occur if you touch the cutting
attachment.
1. Do a visual check for damages, for example cracks.
2. Replace the cutting attachment guard if it is
damaged.
B
B
A