WellGate 2626 User Manual EN-V1.00
Copyright © 2007 Welltech Computer Co., Ltd. All right reserved.
17
Service_PSTN Line
(Figure 12)
In the “Service_PSTN Line ” section (see figure 12), you can define the routing
rule of incoming/outgoing PSTN call, the detail information please refer to the
table below.
PSTN Line Setting
PSTN incoming Route
Specify the PSTN incoming call routing
rule, via IVR or direct to operator.
PSTN Call Notice
If you Select “Yes”, system will send a
PSTN call notice tone before dialing
when the SIP trunk (Ethernet) is fail.
Select “No”, this feature will be
disabled.
Disconnect Tone
Country Template
Specify the location of WG2626, Click
the “Use” icon when you select the
correct country. System will use the
selected country’s PSTN tone to
become the active value. You can
modify it if necessary.
Route Setting
Those prefix defined here, will be route
to PSTN no matter VOIP is active or
not.
All manuals and user guides at all-guides.com
