26xx Technical Manual EN-V108
40
3.3.9 CDR Setting
CDR mode
Select the CDR mode for
Enable
or
Disable
. If you Enable this feature,
please specify the CDR Server address
and port number at the CDR server
address and port’s text box, then you
can get Call Detail Data form CDR
Server.
CDR Server address
If you Enable the CDR mode, please
specify the IP address of CDR Sever for
data storage.
CDR Server port
Specify the CDR Server port number,
The default port number is 514.
1.
Press the
“Apply”
button (at the bottom) after you finish to save changes.
2.
Press the
“Reboot”
button to apply the changes
.
Summary of Contents for Wellgate 2608
