26xx Technical Manual EN-V108
45
as billing stop signal.
T.38 NoAttribute
No attribute (Fax version, Bit Rate,
Buffer, Datagram…) indicated in T.38
Re-Invite with Session Description
Protocol (SDP).
You can Enable/Disable this option.
FAX redundancy depth
Specify the resend times (0~3)for FAX
error packet,
T.38 FAX Type
Select the FAX Type to use, you can
choose the following:
T.38
ByPass
Auto
T.30 FAXByPass Codec
Select the FAX ByPass Codec to use,
you can choose the following:
G.711 a-law
G.711 u-law
Flash key function
(FXS only)
Select the function of Flash key, you
can choose the following:
Disable
Transfer
SIP Message
Keypad DTMF type
Select the type of Keypad DTMF, you
can choose the following:
In-Band
RFC2833
SIP Info
End of dial key
Select the End of dial key, you can
choose the following:
Disable
*
#
DTMF Detection Sensitivity
Specify the grade of DTMF Detection
Sensitivity, the value range is (1~5)
Dial Wait Timeout (1~60sec)
Specify the duration of dial waiting
when the receiver is off hook. The
range is 1~60 sec.
Summary of Contents for Wellgate 2608
