WELLTECH ePBX-100A-128, User Manual

Page: 34 / 124

34
„
Forward CallerID: By default, the “from header of SIP invite” will contain the caller’s
line number when forward function is activated. But this may make some errors
occurred for some SIP Trunk services. So we add this function in the “Extension
Setting” page, to let user modify the line number of SIP Invite’ s from header, from
calling party’s number to the called party’s number.
„
Comment: You can input a 10 bytes note for each extension here.
„
Mail Box: User can select to disable or enable mail box function. If this function is
enabled, user could input e-mail address for the Extension. When having voice mail of
incoming call, system will send this voice mail to the specified e-mail address. You can
also login the mail box system by dialing to *98, if you are using an ePBX-100A-128.
„
E-Mail Address: This field will appear when you enable Mail Box function and you can
input the E-Mail Address here for voice mail to E-mail.
„
Save VM to CF: Optional to not save voice mail to CF card.
„
VM Login Password: User can login voice mail system by dialing to *98, then input
the mailbox number and password for voice mail. User can define the Voice Mail box
login password here. Another way to login the voice mail system is dial to
*98+extension number. For example, dial to *98101 can login EXT101’s voice mail box,
and caller can just input password to access voice mail.
Note:
•
Please remember set the SMTP in the page of Management
Æ
SMTP Setting
to activate the Voice Mail to E-mail.
•
If the ePBX-100A-128 got a new message, it will send the message to the
user by email immediately. If you just hope the ePBX-100A to save voice
mail to it and not send the email. You just need to input “x” to E-Mail
Address.
„
Voice Mail Count: View the exact count of New Messages and Old Messages.
„
Delete MailBox Content: User can delete all of the voice mails and personal greeting
by mark the “Delete MailBox Content” and then press Apply.
Press Apply to save configuration, or press Cancel to quit configuration.
3.1.4 Trunk
User has to set Trunk account for Trunk (FXO device, e.g. WG3804A) to register to
ePBX-100A-128 or set some necessary configuration for SIP trunk (For more application,
please go to…….). Enter Configuration
Æ
Trunk to configure Trunk data.
User can press Modify to add new Trunk or modify configured Trunk data. Press
Delete will delete the specified Trunk.