![background image](http://html1.mh-extra.com/html/welltech/epbx-100a-128/epbx-100a-128_user-manual_955975032.webp)
32
Extension Number:
Assign the number of Extension. This number is also the register
name for device.
Password:
Assign the register password for device to register on ePBX-100A-128.
Call Group:
You can use the Call Group parameter to assign an Extension to one or
more groups.
Pickup Group:
You can use the Pickup Group option in conjunction with this
parameter to allow a ringing phone to be answered from another extension.
Note:
z
The Pickup Group option is used to control which Call Groups a channel may pick
up
—
a channel is given authority to answer another ringing channel if it is assigned
to the same Pickup Group as the ringing channel’s Call Group. By default, remote
ringing extensions can be answered with *8 or **8+ext. number.
z
You can define multiple Call Groups and Pickup Groups for one Extension by a
“comma”. For example, you can input “1,3,5” into Call Group or Pickup Group.
DialPlan:
Define the dialing plan for Extension. It specifies the location of the
instruction used to control what the phone is allowed to do, and what to do with
incoming calls for this extension. In this field, you can Choose 5 dial level for Extension,
including [ext-only], [ext+R1], [ext+R12], [ext+R123], [ext+allroutes]. You can define an
“Outgoing call” record, to a certain Route Level, as R1, R2…, etc. [ext-only] means this
subscriber can only call to Extension. [ext+R1] means the subscriber with such
DialPlan can call to Extension and Route Level with R1. [ext+R12] means the
subscriber with such DialPlan can call to Extension and Route Level with R1 and R2.
[ext+R123] means the subscriber with such DialPlan can call to Extension and Route
Level with R1, R2 and R3. [ext+allroutes] means the subscriber with such DialPlan can
call to Extension and Route Level with R1, R2, R3 and R4.
Note:
•
For more information about Route Level, please refer to the user manual:
CH3.1.6.1 Outgoing Call Rule.
Keypad:
User can select Keypad type to be RFC2833, In-band, SIP-Info and Auto.
You can choose Auto to auto select the Keypad type. Choose RFC2833, Inband or
SIP-Info here will force the Extension use RFC2833, Inband or SIP-Info only and the
setting should be also match the Keypad setting of Extension device.
Summary of Contents for ePBX-100A-128
