6
1-4 Rear Panel: LED Indicators
WellGate 2424s
Figure 1-4 rear panel for FXS
Item
Description
Phone1 - Phone24 The status LED for FXS port 1-24, this will light up amber
orange when the connected phone’s handset is lifted, or
when the connected phone is engaged in a conversation.
It will flash amber orange when there is an incoming call.
(WellGate 2424s only)
LAN
10/100 Base-T RJ-45 socket for LAN port, connects to PC
for management purpose.
WAN
10/100 Base-T RJ-45 socket for WAN port, connects to
wide area network.
AC100V~240V
The power socket, input AC 100V~240V, output DC 12V,
6A.
Console Port
This port is for RS-232 cable connected , the baud rate is
115200, data bits is 8, parity is none, stop bits is 1, flow
control is none. Normally the port is used for Welltech’s
engineer debug.
Notice:
if you want to use it, just could use command
“ifaddr –print” (to display IP address of WAN and LAN port
on screen) or “passwd” (to change password), other
commands are not yet available.
Reset Button
Press and hold over 5 seconds to reload factory default
setting, this will erase all existing settings configured on
this gateway.