WELLSYSTEM SPA COMPLETE, Operating Instructions And Installation Instructions

Page: 13 / 56

Safety instructions and warnings
06/2021 1026902-00 Operating instructions – 11/52
Assembly
DANGER!
Personal danger due to electric shock or burns!
–
The assembly and electrical connection must comply
with the national regulations.
See Assembly / commissioning page 17.
Setup location
CAUTION!
Salty air! Contaminated air!
Unit may be damaged due to corrosion of the housing and
of electric components.
–
Where possible, do not set up the unit at a swimming
pool.
– Do not operate the unit in locations with aggressive
ambient conditions (for example, with air containing
chlorine, in an oxygen enriched environment).
Damage to device possible!
Where there are great differences in temperature between
the transport route and the installation site the device may
not be put into operation immediately after being set up.
–
Wait at least 2 hours before connecting the device to
the power supply.
Risk of overheating due to air flow problems!
Operating faults possible.
–
Do not change, obstruct or block the air inflow and
outflow area to the device or make any unauthorized
changes to the device. The manufacturer shall bear no
liability for damage or injuries resulting from such ac-
tions.
Environmental conditions

Optimum ambient temperature: B15 °C and +32 °C

Air pressure: Between 794 hPa and 1060 hPa

Relative humidity: Between 30 % and 75 %
The device is not to be used outdoors.
The device is not suitable for operation in mobile facilities (ships, buses, trains
or oil platform). The unit has to be adapted in order to guarantee trouble-free
operation when used in mobile facilities.
Adaptation of the unit is required for operating altitudes greater than 2000 m
above sea level in order to guarantee trouble-free operation.
Please contact the Customer service department without fail before putting
the device into operation - see page 2.