background image

11

1  p/n 

2M-303340

    OpManual Built-In Electric Griddles

3

This appliance is intended for use in commercial establishments 

only.
This appliance is intended to prepare food for human consumption.  

No other use is recommended or authorized by the manufacturer or its 

agents.
Operators of this appliance must be familiar with the appliance use, 

limitations and associated restrictions.  Operating instructions must be 

read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation.  Read and 

follow all included cleaning instructions and schedules to ensure the 

safety of the food product.
Disconnect this appliance from electrical power before performing any 

maintenance or servicing.
DO NOT submerge this appliance in water.  This appliance is not jet 

stream approved.  Do not direct water jet or steam jet at this appliance, 

or at any control panel or wiring.  Do not splash or pour water on, in or 

over any controls,  control panel or wiring. 
Exposed surfaces of this appliance can be hot to the touch and may 

cause burns.
The technical content of this manual, including any wiring diagrams,

schematics, parts breakdown illustrations and/or adjustment

procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a 

qualified technician.

This manual is considered to be a permanent part of the appliance.  

This manual and all supplied instructions, diagrams, schematics, parts 

breakdown illustrations, notices and labels must remain with the

appliance if it is sold or moved to another location.
This appliance is made in the USA.  Unless otherwise noted, this

appliance has American sizes on all hardware.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize 

this appliance until all 

installation instructions are 

read and followed.  Damage 

to the appliance will result if 

these instructions are not

followed.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot 

to the touch and may cause 

burns.

PRECAUTIONS AND GENERAL INFORMATION

DANGER:  

BURN HAZARD

Contact with cooking surface cause severe burns. Always wear protective clothing 

and avoid contact with griddle surface.

WARNING:  

ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by 

qualified service personnel.  DO NOT open any access panel that requires the use   

of tools.  Failure to heed this warning may result in severe electric shock.

Summary of Contents for G-136









































Reviews: