Wellis PASRW012, Installation Instructions Manual

Page: 25 / 28

21
7.APPENDIX
7.1 Caution & Warning
1. The unit can only be repaired by qualified installer centre personnel or an authorised
dealer.
（
for Europe market
）
2. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
3. Please make sure that the unit and power connection have good earthing, otherwise may
cause electrical shock.
4. If the supply cord is damaged, it must be replaced by the manufacturer or our service agent
or similarly qualified person in order to avoid a hazard.
5. Directive 2002/96/EC (WEEE):
The symbol depicting a crossed-out waste bin that is underneath the appliance indicates that
this product, at the end of its useful life, must be handled separately from domestic waste, must
be taken to a recycling centre for electric and electronic devices or handed back to the dealer
when purchasing an equivalent appliance.
6. Directive 2002/95/EC (RoHs): This product is compliant with directive 2002/95/EC (RoHs)
concerning restrictions for the use of harmful substances in electric and electronic devices.
7. The unit CANNOT be installed near the flammable gas. Once there is any leakage of the gas
, fire can be occur.
8. Make sure that there is circuit breaker for the unit, lack of circuit breaker can lead to
electrical shock or fire.
9. The heat pump located inside the unit is equipped with an over-load protection system. It
does not allow for the unit to start for at least 3 minutes from a previous stoppage.
10. The unit can only be repaired by the qualified personnel of an installer center or an
authorized dealer.
（
for North America market
）
11. Installation must be performed in accordance with the NEC/CEC by authorized person only.
（
for North America market
）
12. USE SUPPLY WIRES SUITABLE FOR 75 ℃ .
13. Caution: Single wall heat exchanger, not suitable for potable water connection.
22
7.APPENDIX
7.2 Cable specification
1. Single phase unit
2×6mm
2
2×70mm
2
2. Three phas
2
e
× 9
u
5
n
m
it
m
2
Nameplate
maximum
current
Phase line Earth line MCB
Creepage protector Signal line
No more
than 10A
3×1.5mm
2
1.5mm 2 20A 30mA less than 0.1 sec
n
×
0.5mm2
10~16A 3×2.5mm
2
2.5mm
2
32A
30mA less than 0.1 sec
16~25A
3×4mm 2
4mm
2
40A 30mA less than 0.1 sec
25~32A 6mm
2
40A 30mA less than 0.1 sec
32~40A
3×6mm
2
10mm
2
63A 30mA less than 0.1 sec
40 ~63A
3×10mm
2
16mm
2
80A
30mA less than 0.1 sec
63~75A
3
× 16mm 2
25mm 2 100A 30mA less than 0.1 sec
75~101A 3
× 25mm 2
25mm
2
125A 30mA less than 0.1 sec
101~123A 3×25mm
2
35mm
2
160A 30mA less than 0.1 sec
123~148A
3×35mm
2 50mm
2
225A 30mA less than 0.1 sec
148~186A 70mm
2
250A 30mA less than 0.1 sec
186~224A
3×50mm
2
95mm
2
280A
30mA less than 0.1 sec
3×70mm
2
When the unit w
3
i
×
ll
9
b
5m
e
m
in
2
stalled at outdoor, please use the cable which can against UV.
Nameplate
maximum
current
Phase line Earth line MCB
Creepage protector Signal line
No more
than 10A
2×1.5mm 2
1.5mm 2
20A 30mA less than 0.1 sec
n × 0.5mm2
10~16A 2×2.5mm
2
2.5mm 2
32A 30mA less than 0.1 sec
16~25A
2×4mm
2
4mm 2 40A 30mA less than 0.1 sec
25~32A 6mm
2
40A
30mA less than 0.1 sec
32~40A
10mm
2 63A
30mA less than 0.1 sec
40 ~63A
2×10mm
2
16mm
2 80A
30mA less than 0.1 sec
63~75A
2×16mm
2
25mm 2
100A
30mA less than 0.1 sec
75~101A
2×25mm
2
25mm
2
125A
30mA less than 0.1 sec
101~123A
2×25mm
2
35mm
2
160A
30mA less than 0.1 sec
123~148A
2×35mm
2 50mm
2
225A 30mA less than 0.1 sec
148~186A
70mm
2
250A 30mA less than 0.1 sec
186~224A
2×50mm
2
95mm
2
280A 30mA less than 0.1 sec