20
(1) Turn handle in the four way function themo mixer (as shown in the figure) to select the
different shower patterns and related functions like top shower, hand shower,back jet, foot
massage
(2) Turn on the water supply. turn it left and right to adjust the water volume.
(3)Test the water temperature by finger, and then rotate the handle to adjust the temperature
of water until feel comfortable then choose your desired shower pattern.
(4) You can turn the adjustment ring on the shower to get the different shower massage
effect
.
(5) To use the foot massage, please take the foot massage out,then turn the handle to symbol
, put the foot on it,turn on the water,you will enjoy the wonderful foot massage.
(6) After use, turn off the water supply.
VIII. Trouble shooting
Error
Description
Reasons
Solutions
E10
Overtime water
intake
A. General water valve is not
open; B. Failure of inlet valve
control system; C. Failure in
water level detection.
After the steam function is turned on ,the
system will open water inlet after it detects
shortage of water. If the system shows no
water after 10 seconds or the tank remains
unfilled after 1 minute, the system would
report “E10” fault as well as turn off steam
function and inlet valve.
E16
Temperature
anormaly
A. Failure of temperature
detection circuit; B. Failure of
temperature probe.
When the system is turned on ,it shows “E16”
fault and turn off the steam function. Cut off
the power and check the temperature probe as
well as related lines
E18
Communication
Fault
A. Short circuit or open
circuit in communication line;
B. Fault of communication
driver circuit; C. Damage of
CPU I/O port.
During normal use, the board and the display
box have communication problems for five
successive seconds, the system shows “E18”
fault and automatically turn off all external
load. Please check whether the computer
cables are properly connected.
Summary of Contents for WG-U683
Page 12: ...12 ...
