WX 1
7-17
ES
Soldadores
compatibles con WX
para estaciones de
soldar WX
Fig. 6
Datos técnicos WX 1
Dimensiones
L x An x Al (mm): 170 x 151 x 130
L x An x Al (pulgadas): 6,69 x 5,94 x 5,12
Peso
aproximadamente 3,2 kg
Tensión de red
230 V, 50 Hz
Consumo de potencia 200 W
Clase de protección
I, caja antiestática
Protección
Disparador de sobrecorriente T2 A
Rango de temperatura Regulable
50 °C – 550 °C (150 °F – 999 °F)
La gama de temperatura regulable varía
en función de la herramienta.
Precisión de la
temperatura
±
9 °C (
±
17 °F)
Estabilidad térmica
±
2 °C (
±
4 °F)
Equipotential bonding A través del conector hembra jack de
3,5 mm en la parte trasera del aparato.
Material de la caja
Base de aluminio con recubrimiento
antiestático negro (AMS 70002); caja de
poliamida (PA), antiestática
Material del panel de
control
Cristal antiestático con recubrimiento
Panel de control,
dimensiones
74 x 38 mm
Resolución
255 x 127 (128) dots
Iluminación del fondo
4 LEDs
Equipotencial
Gracias a las diferentes posibilidades de conexión del conector
hembra de 3,5 mm (11) hay 4 variantes posibles:
−
(a) Toma de tierra directa: sin conector (estado de suministro).
−
(b) Equipotencial: con conector, línea equipotencial en el contacto
central.
−
(c) Sin potencial: con conector
−
(d) Toma de tierra indirecta: con enchufe y resistencia soldada.
Puesta a tierra a través de la resistencia seleccionada
Puerto USB
La unidad de control WX 1 incorpora un puerto USB (7) en la parte
frontal para la actualización de firmware, parametrización y
monitorización. El puerto USB (7) es compatible con todas las
memorias portátiles USB convencionales.
a
b
c
d